← Blog

Fairer rounds: inside the V2 match algorithm

· 8 min read

Every time you tap Generate next round, Racket Social decides who plays, who sits out, who partners whom and who they face. Version 2.5.0 replaced the engine behind that button. We call it V2.

This post explains what V2 does differently, how we tested it, and what you'll notice on court. Every number below comes from our test harness, which plays thousands of simulated sessions and checks every round.

42.5% → 0% rounds with an avoidable unfair sit-out, 23 players on 4 courts
37.5% → 0% rounds with an avoidable repeat opponent, 8 players on 2 courts
~80 ms to pick a 23-player round on a laptop

The four rules

A good social session follows four rules. Players notice quickly when one is broken:

  1. Equal sit-outs. Nobody sits out twice in a row, and nobody sits while someone who has rested less keeps playing.
  2. Partner variety. Don't pair the same two people again while either of them has someone they've partnered less.
  3. Opponent variety. The same idea for the people across the net.
  4. Skill balance (optional). Keep every court close, using each player's rating.

You choose the order these rules come in. Fairness puts equal sit-outs first. Variety puts fresh partners and opponents first. Custom lets you set your own order. The algorithm tries thousands of candidate rounds and keeps the one that best respects your order.

How we measured it

"Feels fairer" isn't good enough, so we built a harness that judges every round against each rule. It counts a round as a break only when the break was avoidable: a better round existed given everything that had happened so far. For groups of up to 12 players, it checks this by listing every possible round (up to 155,925 of them) and comparing.

We ran 40 simulated sessions per scenario (5 for the slowest 12-player ones). Each session lasted as many rounds as there are players, up to 12. The harness is seeded, so the same run always gives the same numbers. First we tested each rule on its own, then all of them together in every priority order.

What changed

The harness found two reasons V1 broke its own rules, and V2 fixes both.

1. V1 measured the wrong thing for partners, opponents and skill

V1 scored repeat partners and opponents by how recently two players last met. It treated "last round" the same as "three rounds ago", then averaged across all pairs. Two long-ago meetings could cancel out two immediate repeats. V2 counts what players actually notice: how many pairs are repeats while a fresher option was available. How recently a pair last met only matters as a tie-breaker. For skill, V1 averaged the gap across courts. V2 looks first at the most uneven court, because that's the one people complain about.

2. V1 stopped searching too early

The algorithm uses simulated annealing. It starts by trying wild changes and becomes pickier as it "cools". V1 stopped while it was still accepting clearly worse rounds, so on big groups it often settled on a good-but-not-best round. V2 finishes colder. That costs about 75% more work per round, and still takes well under a tenth of a second.

The results

Share of rounds where each rule was broken although a better round existed, with each rule tested on its own. Lower is better.

Equal sit-outs · 23 players, 4 courts
42.5%
0%
Equal sit-outs · 12 players, 2 courts
13.3%
0%
Opponent variety · 6 players, 1 court
28.8%
0%
Opponent variety · 8 players, 2 courts
37.5%
0%
Opponent variety · 12 players, 3 courts
65.0%
20.0%
Partner variety · 12 players, 3 courts
16.7%
0%
Skill balance · 8 players, 2 courts
12.5%
0%
Avoidable rule breaks per round, V1 (grey) vs V2 (blue). In 19 of the 20 scenarios we test, V2 breaks no rule that could have been kept. The full table is below.

What it means on court

Five or six friends, one court

With few players, opponents come round again quickly, so variety matters most. One V1 round from our tests had six players on one court. V1 put two players back against the same two opponents they had faced in the previous round, their third meeting. Meanwhile a round existed where nobody faced anyone more than once. V1's recency score actually rated the repeat round as better, because two long-ago pairings in it pulled the average down.

Before: an avoidable repeat opponent in 28.8% of rounds (6 players) and 22.5% (5 players). After: 0%. Repeats still happen when every option is a repeat (with 5 players that's from round 2, with 6 from round 4), but never when a fresher matchup was possible.

A busy club night: 12 to 23 players

On a big night the most visible problem is the bench. Someone sits out again while a player who has rested less keeps playing. With 23 players on 4 courts, V1 did this in 42.5% of rounds, and by the end of a session some players had sat out three more times than others. With 12 players on 2 courts it happened in 13.3% of rounds.

After: 0% in both. Everyone ends the session within one sit-out of everyone else, in every roster size we test, from 4 to 23 players. With 12 players on 3 courts you also play longer before getting a repeat partner: about round 11 instead of round 9, out of a theoretical best of 12.

Late arrivals and early leavers

Real sessions aren't tidy. People turn up at half past and leave before the end. Racket Social judges sit-outs by rate (rounds sat out ÷ rounds present), so a latecomer isn't benched to "catch up" on sit-outs they weren't there for. In our 12-player test with two late arrivals and one early leaver, V1 still got the bench wrong in 4.0% of rounds. V2 got it right every time.

Mixed-ability groups with skill balance on

With Skill-balanced matchmaking on, V1 averaged the gap across all courts. It would accept one lopsided court if the others were very even. Testing skill on its own with 8 players of mixed ratings, V1 left a court more than one rating point less even than it needed to be in 12.5% of rounds. V2, which looks first at the most uneven court, got it to 0%.

When the rules compete

In a real session all four rules are on at once, and your priority order decides who wins. We replayed 19 tricky mid-session situations under all 24 priority orders, 10 times each. Under the default Fairness order, out of 190 runs:

Rule (Fairness order) V1 breaks V2 breaks
1. Equal sit-outs60
2. Partner variety160
3. Opponent variety5620
4. Skill balance3323

Lower-priority rules can still give way. That's what a priority order is for. But the rules at the top now hold. Across all 24 orders, the rule you put first was broken in 701 of 4,560 runs on V1 and 71 on V2.

All single-rule results

Rounds with an avoidable break, each rule tested on its own. "1 court" means one doubles court. Rosters with spare players sit the rest out.

Rule · roster V1 V2
Equal sit-outs · 4, 5, 7, 10 and 14 players0%0%
Equal sit-outs · 12 players, 2 courts13.3%0%
Equal sit-outs · 12 players, late arrivals + leaver4.0%0%
Equal sit-outs · 18 players, 4 courts0.6%0%
Equal sit-outs · 23 players, 4 courts42.5%0%
Partner variety · 5 players, 1 court6.0%0%
Partner variety · 6 players / 8 players0%0%
Partner variety · 12 players, 3 courts16.7%0%
Opponent variety · 5 players, 1 court22.5%0%
Opponent variety · 6 players, 1 court28.8%0%
Opponent variety · 8 players, 2 courts37.5%0%
Opponent variety · 12 players, 3 courts65.0%20.0%
Skill balance · 8 players, mixed ratings12.5%0%
Skill balance · 8 players with one star / 10 players0%0%

What we haven't fixed yet

V2 is live for everyone; you don't need to change anything. If a round ever looks unfair, tell us in the WhatsApp community. Real sessions are the best test data we have.

Try V2 in your next session →

About the numbers